sE X1 S Studio mic pack Cardioid condenser Microphone Vocal Booth Bundle
sE Electronics X1 S Studio Vocal Bundle inc Microphone, RFX Reflection screen, Pop Filter and Cable
An X1 S with sE's Isolation Pack shockmount + pop, a 3-meter XLR cable, and sE's RF-X Reflexion Filter - an instant vocal recording setup for any home studio.
Meet the X1 S, the new gold standard in affordable condensers.
The X1 S is a refined version of sE's best-selling X1, tuned for advanced performance in every way imaginable.
When sE introduced the X1 in 2010, it redefined the potential of an affordable hand-crafted condenser microphone.
With the highest dynamic range and SPL handling capabilities in its class, along with expanded features that dramatically increase its flexibility, the X1 S has been improved in every way - yet is even more affordable than the original.
CUSTOM-DESIGNED, HAND-CRAFTED CAPSULE
Just like its predecessor, the X1 S utilizes a hand-made condenser capsule, meticulously constructed and tuned in sE’s capsule roomby technicians with decades of experience.
This results in a capsule built like the world’s finest musical instruments - and a capsule truly up to the challenge of recording them.
HIGH-PERFORMANCE ELECTRONICS
Where the original X1 was powerful, the redesigned electronics of the X1 S take its performance to a whole new level, giving it the highest dynamic range in its class.
Its internal redesign also allows for improved sensitivity, dramatically increased SPL handling (up to 160dB!), and a huge reduction in self-noise.
TWO SWITCHABLE ATTENUATION LEVELS
The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.
TWO SWITCHABLE LOW-CUT FILTERS
Selectable at either 80Hz or 160Hz, these two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques.
ALL-METAL HOUSING AND PREMIUM FINISH
Unlike the cheaply constructed bodies of some other "entry-level" microphones, the X1 S's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come.
GOLD-PLATED XLR CONNECTOR
Ensures loss-free, reliable signal connection for years and years and years and...
The X1 S also comes standard with a mic clip that will securely attach it to any mic stand, but if you're interested in additional mounting and accessory options, you can read about the X1 S bundles below.
Capsule Type: Hand-Crafted 1" True Condenser
Polar Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 30 mV/Pa (-30.5 dBV)
Max SPL: 140 / 150 / 160 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
Equivalent noise level: 9 dB(A)
Dynamic range: 131 / 141 / 151 dB (0/10/20 dB Attentuation pad)
Signal to Noise Ratio: 85 dB
Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
Attenuation Pad: 10 / 20dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: 125 Ohms
Recommended load impedance: <1k Ohms
Current consumption: 6 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 58mm (2.28 in), Length 169mm (6.65 in)
Weight: 445 g (15.70 oz.)
 |  |
 |  |
 | "https://www.musicfactorydirect.com.au/assets/imported/ebay/images/se/X1S/X1-S-vocals1.jpg" width="349" height="227" alt="" > |
(SEEL_X1SPACKAGE)
| SKU | SEEL_X1SPACKAGE |
| Brand | Se Electronics |
| Shipping Weight | 5.1160kg |
Be The First To Review This Product!
Help other Music Factory Direct users shop smarter by writing reviews for products you have purchased.
