Designed and manufactured in Sydney, Australia - The new NT2-A is a professional large capsule (1") condenser studio microphone with variable pick-up pattern, Variable high pass filter and variable pad. These features provide greater creative control and versatility. Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 80 Hz or 40 Hz high-pass filter and a Pad adjustment of 0 dB, -5 dB or -10 dB attenuation.


The NT2-A carries on the tradition forged by the now legendary RODE NT2. A professional large capsule (1") studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.
At the heart of the NT2-A is the Australian designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50's and 60's. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.

The NT2-A's variable controls allow switching between Omni, Figure 8, and Cardioid polar patterns. The three position high-pass filter provides a flat response or an 80Hz and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched between 0 dB, -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.

Free Included Accessories


The Australian designed and manufactured HF1 1" edge terminated, gold sputtered, dual 5 um diaphragm capsule.
3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.
3-position variable high-pass filter: Flat, 80 Hz or 40 Hz.
3-position variable pad: 0 dB, -5 dB or -10 dB.
Ultra low noise, transformerless SMT circuitry.
Wide dynamic range.
High strength heat-treated steel mesh head.
Durable satin nickel finish.
Internal capsule shock mounting.
Supplied complete with soft pouch and clip.
FREE shock mount and pop filter
FREE professional 20' microphone cable
FREE microphone dust cover

Omnidirectional Polar Figure 8
Polar Cardiod Polar Response
(Picks up all sides evenly) (Picks up the front and rear and rejects the sides) (Picks up the front & sides and rejects the rear)



Acoustic principle:
Externally polarized 25 mm (1") dual diaphragm.

Directional pattern:
Multi-pattern (see graphs over).

Frequency range:
20 Hz ~ 20 000 Hz (see graphs above)

Output impedance:
200 Ohms

Signal/Noise ratio DIN/IEC 651:
87 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)

Equivalent noise:
7 dBA SPL (per IEC651, IEC268-15)

Maximum SPL:
147 dB (@ 1% THD into 1 kO)
157 dB (@ 1% THD into 1 kO) - pad at maximum

Sensitivity at 1 khz into 1 kO:
-36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/-2 dB

Maximum output voltage:
+16 dBu (@ 1% THD into 1 kO)

Dynamic range of the mic. amplifier DIN/IEC 651
140 dB (per IEC651, IEC268-15)

Power (Supply voltage):
48 Volts (P48)

Output Connection:
3 pin XLR, balanced output between pin 2(+) and pin 3(-).
Pin 1 ground

Weight approx.:
860 grm (4.23 oz)

209 mm (8.228")
55 mm (2.165")


1 year with free extension to 10 years following registration



 DP Stage Mic Screen-100

Capture studio quality vocal recordings anywhere you want with the DP Stage Mic Screen-100 Sound Reflection Screen. The Mic Screen-100's acoustic design delivers that warm, dry vocal recording with the quality you expect from an expensive professional recording studio. The special acoustic foam design eliminates reflection and helps to achieve not just warmth, but more detail and articulation from any recording. The integrated acoustic panel including the perforated aluminium back also prevents external noise entering the microphone such as fans, air conditioners and traffic noise. The Mic Screen-100 comes assembled in the box and includes all accessories required to attach easily to a microphone stand. The microphone mounting bracket is adjustable enabling the microphone to be positioned any distance from the Mic Screen-100 to suit individual requirements and includes a microphone height extension adapter to ensure any microphone can be positioned vertically in the centre of the Mic Screen-100. Compatible with almost all microphones. Durable, reliable and stylish design. Suitable for vocals and many other instrument applications. Portable and light weight - perfect for location recording

Note: The Rode microphone and pop filter in the photos are not included in this offer. This listing is for a DP Stage Mic Screen-100 only.


  • Capture Studio Quality Recordings Anywhere You Want
  • Delivers Warm, Dry Vocals with More Detail and Articulation
  • Eliminates Reflection, Room Ambiance and External Noise
  • Perfect for Home Recording or Location Recording
  • Integrated Acoustic Design Including Thick Foam and Perforated Aluminium Provides the Highest Level of Isolation
  • Includes Adjustable Mounting Brackets and Mic Height Extension Adapter
  • Easily Attaches to Any Standard Microphone Stand
  • Compatible with Almost Any Microphone
  • Dimensions: W-480mm x H-300mm x D-260mm
  • 5 Year Warranty

Mic Screen -100 using microphone height extension adapter

Click here for set up instruction guide pdf:


SKU NT2AbundleMIC-100
Brand Rode
Shipping Weight 11.0000kg

Be The First To Review This Product!

Help other Music Factory Direct users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category